Categories
Latest Products
This J-head V2.0 hotend is a combination of ideas from other nozzle designs combined with a goal to reduce the number of custom machined parts to a bare minimum.
The J-Head V2.0 has been proven to print reliably with both ABS and PLA. PLA will require a small fan to provide air-flow through the cooling vents milled in the sides of the nozzle holder.
This hot-end easily interfaces with the most popular RepRap extruders, including Wade's Extuder, Greg Frost's Hinged Accessible Extruder, etc.
Features:
The J-head is assembled with 100K NTC thermistor and Cartridge heater,NOT heat resistor.Check the following specifications for the assembled heater.
Materail: Stainless Steel,PVC,Nylon
Voltage: 12V
Power: 30w
Wire Length :1m
Heater size: 6 x 15mm(D*L)
High-quality PEEK heat-insulated pipe.
Duralumin alloy nozzle.
Small size, light weight.
The PTFE is not stressed nor used to provide support. This reduces a point of failure that is part of other designs.
A resistor is used as a heater. There is no need to wrap nichrome wire or to bake a heater core.
The entrance is located at the PEEK tube inner side, which is more preferable for the implementation of the short-range extruders.
Noted:
4 optional nozzle size: 0.3mm, 0.35mm, 0.4mm, 0.5mm
2 optional filament size: 1.75mm, 3.00mm
Package list:
1 x Peek short-distance J-Head V2.0 Hot End & Cartridge heater. (Please Note: Choose "Nozzle Size" and "filament size" you wanna)
More information please refer to the wiki page
This J-head V2.0 hotend is a combination of ideas from other nozzle designs combined with a goal to reduce the number of custom machined parts to a bare minimum.
The J-Head V2.0 has been proven to print reliably with both ABS and PLA. PLA will require a small fan to provide air-flow through the cooling vents milled in the sides of the nozzle holder.
This hot-end easily interfaces with the most popular RepRap extruders, including Wade's Extuder, Greg Frost's Hinged Accessible Extruder, etc.
Features:
The J-head is assembled with 100K NTC thermistor and Cartridge heater,NOT heat resistor.Check the following specifications for the assembled heater.
Materail: Stainless Steel,PVC,Nylon
Voltage: 12V
Power: 30w
Wire Length :1m
Heater size: 6 x 15mm(D*L)
High-quality PEEK heat-insulated pipe.
Duralumin alloy nozzle.
Small size, light weight.
The PTFE is not stressed nor used to provide support. This reduces a point of failure that is part of other designs.
A resistor is used as a heater. There is no need to wrap nichrome wire or to bake a heater core.
The entrance is located at the PEEK tube inner side, which is more preferable for the implementation of the short-range extruders.
Noted:
4 optional nozzle size: 0.3mm, 0.35mm, 0.4mm, 0.5mm
2 optional filament size: 1.75mm, 3.00mm
Package list:
1 x Peek short-distance J-Head V2.0 Hot End & Cartridge heater. (Please Note: Choose "Nozzle Size" and "filament size" you wanna)
More information please refer to the wiki page
RETURNS POLICY
Lorem ipsum dolor sit amet, consectetur adipiscing elit. Morbi ut blandit risus. Donec mollis nec tellus et rutrum. Orci varius natoque penatibus et magnis dis parturient montes, nascetur ridiculus mus. Ut consequat quam a purus faucibus scelerisque. Mauris ac dui ante. Pellentesque congue porttitor tempus. Donec sodales dapibus urna sed dictum. Duis congue posuere libero, a aliquam est porta quis.
Donec ullamcorper magna enim, vitae fermentum turpis elementum quis. Interdum et malesuada fames ac ante ipsum primis in faucibus.
Curabitur vel sem mi. Proin in lobortis ipsum. Aliquam rutrum tempor ex ac rutrum. Maecenas nunc nulla, placerat at eleifend in, viverra etos sem. Nam sagittis lacus metus, dignissim blandit magna euismod eget. Suspendisse a nisl lacus. Phasellus eget augue tincidunt, sollicitudin lectus sed, convallis desto. Pellentesque vitae dui lacinia, venenatis erat sit amet, fringilla felis. Nullam maximus nisi nec mi facilisis.
SHIPPING
Lorem ipsum dolor sit amet, consectetur adipiscing elit. Morbi ut blandit risus. Donec mollis nec tellus et rutrum. Orci varius natoque penatibus et magnis dis parturient montes, nascetur ridiculus mus. Ut consequat quam a purus faucibus scelerisque. Mauris ac dui ante. Pellentesque congue porttitor tempus. Donec sodales dapibus urna sed dictum. Duis congue posuere libero, a aliquam est porta quis.
Donec ullamcorper magna enim, vitae fermentum turpis elementum quis. Interdum et malesuada fames ac ante ipsum primis in faucibus.
Curabitur vel sem mi. Proin in lobortis ipsum. Aliquam rutrum tempor ex ac rutrum. Maecenas nunc nulla, placerat at eleifend in, viverra etos sem. Nam sagittis lacus metus, dignissim blandit magna euismod eget. Suspendisse a nisl lacus. Phasellus eget augue tincidunt, sollicitudin lectus sed, convallis desto. Pellentesque vitae dui lacinia, venenatis erat sit amet, fringilla felis. Nullam maximus nisi nec mi facilisis.
