LG01-N Single Channel LoRa IoT Gateway - 868MHz

LG01-N is an open source single channel LoRa Gateway. It lets you bridge LoRa wireless network to an IP network via WiFi, Ethernet, 3G or 4G cellular. The LoRa wireless allows users to send data and reach extremely long ranges at low data-rates. It provides ultra-long range spread spectrum communication and high interference immunity.
LG01-N has rich internet connection method such as WiFi interface, Ethernet port and USB host port. These Interfaces provide flexible methods for users to connect their sensor networks to Internet.
LG01-N can support the LoRaWAN protocol in single frequency and customized LoRa transmit protocol. Different from LG01-P/LG01-S, LG01-N use the Linux to directly control the sx1276/sx1278 LoRa module which increase the communication efficiency and simplify the software design.
LG01-N can be used to provide a low cost IoT wireless solution to support 50~300 sensor nodes.
Except LoRaWAN mode, LG01-N can support mutiply working mode such as: MQTT mode, TCP/IP Client mode to fit different requirement for IoT connection.
LG01-N base on sx1276 solution which provide a low cost for your IoT network connection. Compare to the cost with normal SX1301 LoRaWAN solution. the LG01-N is only of its 1/4 or less cost. This make the LG01-N very suitable to set up small scale LoRa network.



Features:
Open Source OpenWrt system
Low power consumption
Firmware upgrade via Web
Software upgradable via network
Flexible protocol to connect to IoT servers
Auto-Provisioning
Built-in web server
Managed by Web GUI, SSH via LAN or WiFi
Internet connection via LAN, WiFi, 3G or 4G
Failsafe design provides robustly system
1 x SX1276/SX1278 LoRa module
Limited support in LoRaWAN/ Support Private LoRa protocol
Support up to 300 nodes
LoRa band available at 433/868/915/920 Mhz
Max range in LoRa: 5~10 km. Density Area:>500m
Applications:
Wireless Alarm and Security Systems
Home and Building Automation
Automated Meter Reading
Industrial Monitoring and Control
Long range Irrigation Systems
GPS tracker,etc
LoRaWAN Reapeter
Specifications
Linux Side:
Processor: 400MHz, 24K MIPS
Flash: 16MB ; RAM: 64MB
LoRa Side:
LoRa Controller:AR9331 24K MIPS / Linux
LoRa Chip: SX2176
Interfaces:
10M/100M RJ45 Ports x 2
WiFi : 802.11 b/g/n
LoRa Wireless
Power Input: 12V DC
USB 2.0 host connector x 1
USB 2.0 host internal interface x 1
LoRa Interface x 1

Part List:
1 x LG01-N LoRa Gateway
1 x Glue Stick Antenna(868 MHZ)
1 x Power Adapter
Notice:
LG01 is a single channel gateway, it can be used in LoRaWAN network but not LoRaWAN full compatible. Please see the user manual before buying it.