RF Explorer IoT Touchscreen Kit For Raspberry Pi

Product description:
This advanced kit provides a cost effective solution for a high performance, color touch screen Spectrum Analyzer covering 15MHz to 2700MHz. Included in the package kit are these these items:
RF Explorer 3G+ IoT module
Raspberry Pi official 7" Touch Screen
Acrylic custom designed holder
RF Explorer 3G+ IoT modules are ready to use, advanced Spectrum Analyzer devices you can configure and control easily with Raspberry Pi using a compatible Touch Screen and free RFETouch software.
These modules are cost-effective platforms to develop your own customized Spectrum Analyzer, Power Detector, RF activity alarm, RF sniffer, RF QA test bench, etc.
Programmability and network capabilities of the hosting platform enables remote control and diagnosis scenarios, fully automated RF alarm systems, advanced assistance for unattended detection requirements such as those of radio operators, cell towers and HAM stations.
Additional items required but not included in the kit are:
Raspberry Pi model 2, 3 or 4
USB power source for Raspberry Pi and Touchscreen
These items can be reused from other experiments or ordered together with the kit.
Specification:
RF Explorer 3G+ IoT module
Includes the advanced 3G+ MWSUB3G RF Explorer Module
Frequency band coverage 15-2700 MHz
Antenna connector Standard SMA 50 ohms
Advanced selectable internal input stage Normal, LNA, 30dB attenuator
Amplitude resolution 0.5dBm
Dynamic range -130dBm to +10dBm
Absolute max input power +30dBm
Average noise floor level (typical with LNA enabled) -120dBm
Frequency stability and accuracy (typical) +-10ppm
Amplitude stability and accuracy (typical) +-3dBm
Frequency resolution 1 KHz
Resolution bandwidth (RBW) Automatic 3KHz to 600KHz
Power consumption 100 - 500mW
All modules are factory calibrated

Features
RF Explorer 3G+ IoT module
Design and customize your own Spectrum Analyzer, RF Detector, RF Sniffer, etc
Open source design, open source libraries and examples
Supported by all Raspberry Pi boards.
Can update IoT firmware directly from Raspberry Pi no other accessories required
Flexible board: can be connected to a Raspberry Pi by soldering a compatible female header
Recommend to select SMA antennas for specific application
IMPORTANT: In Raspberry Pi 3, WiFi should be shutdown to avoid interference with the analyzer.
Raspberry Pi Touch Screen
7" Touchscreen Display.
Screen Dimensions: 194mm x 110mm x 20mm (including standoffs)
Viewable screen size: 155mm x 86mm
Screen Resolution 800 x 480 pixels
10 finger capacitive touch.
Connects to the Raspberry Pi board using a ribbon cable connected to the DSI port.
Adapter board is used to power the display and convert the parallel signals from the display to the serial (DSI) port on the Raspberry Pi.
More information:
Please visit www.rf-explorer.com/iot
Contents:
Raspberry Pi Touchscreen
RF Explorer 3G+ IoT module
Touchscreen acrylic holder