Maix Go AI Development Kit RISC-V K210 IOT

Introduction
Maix GO development board adopts AI chip K210 of RISC kernel. K210 comes with dual-core processor chip with independent FPU, 64 bits CPU bit width, 8 MB on-chip SRAM, 400 adjustable nominal frequency, and double-precision FPU supporting multiplication, division, and square root operation. Besides, there are on-board accelerometer MSA300, audio encoding chip, MEMS microphone, etc. As the name suggests, this is really a ready-to-go kit!
The product features RISC frame, high performance, low price, AI, and MicroPython support. MaixPy firmware is micropython firmware, which makes it easy for everyone to use AI algorithms and the operation of conventional microcontrollers; MaixPy firmware is compatible with most APIs of OpenMV! Buying the MAIX development board is equivalent to having an OpenMV development board that is three times the price of the MAIX development board! And the measured power of the ordinary algorithm is 2~3 times of the original STM32H7 version! The power of the AI algorithm is even more than 1000 times that of the STM32H7 version of openmv! That's right, it's 1000 times!
The Kit includes:
Maix Go Development Board
Acrylic Case
200 W Pixel M12 Camera (4mm focal length HD Lens)
500mAH Lithium battery
2.8"OVGA LCD
1W Small Speaker
Type-C High-Quality USB Cable
WiFi Antenna
Features
Controller Chip: K210
Chip Kernel: dual-core RISC-V 64bit IMAFDC
Main Frequency: nominal 400M, can be overclocked to 600M
Memory: 6MB general purpose memory+2MB AI memory
Flash: 16MB
MicroPython Support
Compatible with Most OpenMV Algorithms
Support Neural Network Algorithms: encapsulates the nnn class of mpy
Neural Network Algorithms Speed: hundreds of GOPS (thousands of times STM32)
Face Detection Speed: conventional algorithms 6 frames
Image Recognition: QVGA@60FPS/VGA@30FPS
Debugging Support: UART and JTAG interface
3-Axis Digital Accelerometer: I2C interface
14 bits resolution,
selectable range: ¡À2g, ¡À4g, ¡À8g, ¡À16g
RTC: on-board 32.768K crystal connected with STM32F103
LCD Interface: Maix-LCD board (with resistive touch screen) is directly connected to the GO
GPIO Interface: all GPIOs connected to header 2*20P 2.54mm
DVP Camera Interface: 24P 0.5mm FPC connector
On-board MEMS Microphone
On-board TF Card Slot
Microphone Array Connector
Lithium Battery Port
USB Type-C Port
Audio Encoding Chip+Dual-channel Audio Amplifier
RGB LED
200W Camera, M12 lens mount, default with 4mm focal length HD lens
1W Small Speaker
Three-way Dial Button
2.8" LCD with resistive touch screen, resolution 320*240
Specification
Dimension: 90x 61.5x9.5mm/3.54x2.42x0.37" (installed)
Maix GO Size: 60x 88mm/2.36x3.46"
Input Voltage: 4.8~5.2 V
Input Current: >600mA
Temperature Rise: <30 K
Operating Temperature: -30~85 oC
Wireless Standard: 802.11 b/g/n
Frequency Range: 2400Mhz~2483.5Mhz
TX Power: 802.11.b : +15dBm
802.11.g : +10dBm(54Mbps)
802.11.n : +10dBm (65Mbps)
Antenna Connector: IPEX 3.03.0mm
WiFi Mode: Station/SoftAP/SoftAP+Station
Shipping List
Maix Go Development Board x1
Acrylic Case x1
200 W Pixel M12 Camera (4mm focal length HD Lens) x1
500mAH Lithium battery x1
2.8"OVGA LCD x1
1W Small Speaker x1
Type-C High Quality USB Cable x1
WiFi Antenna x1