DFRobot DF9GMS 360 Degree Micro Servo (1.6Kg)
Rated 3.5/5 based on 11 customer reviews

DFRobot DF9GMS 360 Degree Micro Servo (1.6Kg)

Available: In Stock
Wishlist
$5.99 $8.99
Image
  • Order within
Introduction
The DFRobot DF9GMS is a 360 degree micro servo. It uses a plastic gear drive and is light and compact. It can be used for various applications and DIY products, such as toy cars, boats, windmills etc.
A 360 degree servo¡¯s operation is more similar to a DC motor than a standard servo as only rotation direction and speed can be controlled. There is also no hardware stop inside so that the shaft can rotate freely. Compared to an ordinary DC motor, a 360-degree servo motor does not require additional motor drivers and is plug and play, compact and convenient. Arduino control methods are also the same. When the servo is operating on the 4.8 ~ 6V power supply, the torque can reach 1.2 ~ 1.6Kg x cm
Specification
Operating Voltage: 3.5 - 6.0V
Supply Voltage: 4.8V ~ 6.0V
Dead Zone Width: 5usec
Working Speed: 0.12sec/60 (4.8V no load)
Stall Torque: 1.2kg/cm (4.8V), 1.6kg/cm (6.0V)
Neutral Location: 1500us
Interface Description:
Brown: GND
Red: VCC
Orange: S
Cable Length: 250mm
Operating Temperature: -30¡ãC to + 60¡ãC
Dimensions: 22.6 x 12.2 x 30 mm /0.89x0.48x1.18"
Weight: 9¡À1g
Shipping List
DFRobot DF9GMS 360 Degree Micro Servo (1.6Kg) x1
Accessories x1
Introduction
The DFRobot DF9GMS is a 360 degree micro servo. It uses a plastic gear drive and is light and compact. It can be used for various applications and DIY products, such as toy cars, boats, windmills etc.
A 360 degree servo¡¯s operation is more similar to a DC motor than a standard servo as only rotation direction and speed can be controlled. There is also no hardware stop inside so that the shaft can rotate freely. Compared to an ordinary DC motor, a 360-degree servo motor does not require additional motor drivers and is plug and play, compact and convenient. Arduino control methods are also the same. When the servo is operating on the 4.8 ~ 6V power supply, the torque can reach 1.2 ~ 1.6Kg x cm
Specification
Operating Voltage: 3.5 - 6.0V
Supply Voltage: 4.8V ~ 6.0V
Dead Zone Width: 5usec
Working Speed: 0.12sec/60 (4.8V no load)
Stall Torque: 1.2kg/cm (4.8V), 1.6kg/cm (6.0V)
Neutral Location: 1500us
Interface Description:
Brown: GND
Red: VCC
Orange: S
Cable Length: 250mm
Operating Temperature: -30¡ãC to + 60¡ãC
Dimensions: 22.6 x 12.2 x 30 mm /0.89x0.48x1.18"
Weight: 9¡À1g
Shipping List
DFRobot DF9GMS 360 Degree Micro Servo (1.6Kg) x1
Accessories x1

RETURNS POLICY

Lorem ipsum dolor sit amet, consectetur adipiscing elit. Morbi ut blandit risus. Donec mollis nec tellus et rutrum. Orci varius natoque penatibus et magnis dis parturient montes, nascetur ridiculus mus. Ut consequat quam a purus faucibus scelerisque. Mauris ac dui ante. Pellentesque congue porttitor tempus. Donec sodales dapibus urna sed dictum. Duis congue posuere libero, a aliquam est porta quis.

Donec ullamcorper magna enim, vitae fermentum turpis elementum quis. Interdum et malesuada fames ac ante ipsum primis in faucibus.

Curabitur vel sem mi. Proin in lobortis ipsum. Aliquam rutrum tempor ex ac rutrum. Maecenas nunc nulla, placerat at eleifend in, viverra etos sem. Nam sagittis lacus metus, dignissim blandit magna euismod eget. Suspendisse a nisl lacus. Phasellus eget augue tincidunt, sollicitudin lectus sed, convallis desto. Pellentesque vitae dui lacinia, venenatis erat sit amet, fringilla felis. Nullam maximus nisi nec mi facilisis.

SHIPPING

Lorem ipsum dolor sit amet, consectetur adipiscing elit. Morbi ut blandit risus. Donec mollis nec tellus et rutrum. Orci varius natoque penatibus et magnis dis parturient montes, nascetur ridiculus mus. Ut consequat quam a purus faucibus scelerisque. Mauris ac dui ante. Pellentesque congue porttitor tempus. Donec sodales dapibus urna sed dictum. Duis congue posuere libero, a aliquam est porta quis.

Donec ullamcorper magna enim, vitae fermentum turpis elementum quis. Interdum et malesuada fames ac ante ipsum primis in faucibus.

Curabitur vel sem mi. Proin in lobortis ipsum. Aliquam rutrum tempor ex ac rutrum. Maecenas nunc nulla, placerat at eleifend in, viverra etos sem. Nam sagittis lacus metus, dignissim blandit magna euismod eget. Suspendisse a nisl lacus. Phasellus eget augue tincidunt, sollicitudin lectus sed, convallis desto. Pellentesque vitae dui lacinia, venenatis erat sit amet, fringilla felis. Nullam maximus nisi nec mi facilisis.