Categories
Latest Products
Designed for multi-rotor projects, this brushless DC motor is a boon for all drone enthusiasts. The brushless DC motor has the following features: capable of outputting large torques at low speeds and allowing full power operation at any speed. High efficiency and strong overload capability, good regenerative-braking effect, small size, high power density and simple drive control.
Dimension Figure
The motor adopts high-quality NSK bearings with strong durability which can achieve more stable rotation, higher resistance to falls and super-low noise. The internal oxygen-free winding copper set can withstand high temperature of up to 220¡æ. So, there is no need to worry about burning the motor when turning at high speed. The maximum hollow design not only makes the motor lighter but also improves thermal performance. The unique assembly process can guarantee 100% dynamic balance calibration, so that the flight is more stable. At the same time, we also equipped with a positive and negative thread, which eliminates the safety hazard of multi-axis installed anti-propeller rear-shooting paddle, and secures a safe flight.
This brushless DC motor is suitable for the intelligent robot, drone line and other industries and professional aerial photography. It is ideal for a wide range of makers and enthusiasts.
NOTE:This motor needs to be used with a drive plate.
Specification
Motor
KV value: 2480
Stator diameter: 18mm
Stator length: 4mm
Axis diameter: M5 (0.8mm)
Motor size(outside): ¦µ23¡Á25.1mm (D * L) / ¦µ0.9¡Á1.0inch
Weight: 16g
Power supply: 2-3 lithium batteries
Maximum continuous current: 5A
Maximum continuous power: 55.5W
Magnetic steel model: N40UH, ferrite boron magnetic steel
Bearing model: NSK
Silicon steel chip: 0.2mm cold-rolled low iron loss no-orientation silicon steel
Dynamic balance: 100% dynamic balance calibration
Copper wire: oxygen-free copper, with 220¡ãC heat-resistant temp
Drive board
Continuous current: 20A
Peak current: 25A
BEC: NO BEC
Input voltage: 2-4 lithium batteries
Weight: 7.5g
Dimension: 27*12mm / 1.06*0.47inch
Shipping List
Brushless DC Motor MTO1804 (CCW) x1
Designed for multi-rotor projects, this brushless DC motor is a boon for all drone enthusiasts. The brushless DC motor has the following features: capable of outputting large torques at low speeds and allowing full power operation at any speed. High efficiency and strong overload capability, good regenerative-braking effect, small size, high power density and simple drive control.
Dimension Figure
The motor adopts high-quality NSK bearings with strong durability which can achieve more stable rotation, higher resistance to falls and super-low noise. The internal oxygen-free winding copper set can withstand high temperature of up to 220¡æ. So, there is no need to worry about burning the motor when turning at high speed. The maximum hollow design not only makes the motor lighter but also improves thermal performance. The unique assembly process can guarantee 100% dynamic balance calibration, so that the flight is more stable. At the same time, we also equipped with a positive and negative thread, which eliminates the safety hazard of multi-axis installed anti-propeller rear-shooting paddle, and secures a safe flight.
This brushless DC motor is suitable for the intelligent robot, drone line and other industries and professional aerial photography. It is ideal for a wide range of makers and enthusiasts.
NOTE:This motor needs to be used with a drive plate.
Specification
Motor
KV value: 2480
Stator diameter: 18mm
Stator length: 4mm
Axis diameter: M5 (0.8mm)
Motor size(outside): ¦µ23¡Á25.1mm (D * L) / ¦µ0.9¡Á1.0inch
Weight: 16g
Power supply: 2-3 lithium batteries
Maximum continuous current: 5A
Maximum continuous power: 55.5W
Magnetic steel model: N40UH, ferrite boron magnetic steel
Bearing model: NSK
Silicon steel chip: 0.2mm cold-rolled low iron loss no-orientation silicon steel
Dynamic balance: 100% dynamic balance calibration
Copper wire: oxygen-free copper, with 220¡ãC heat-resistant temp
Drive board
Continuous current: 20A
Peak current: 25A
BEC: NO BEC
Input voltage: 2-4 lithium batteries
Weight: 7.5g
Dimension: 27*12mm / 1.06*0.47inch
Shipping List
Brushless DC Motor MTO1804 (CCW) x1
RETURNS POLICY
Lorem ipsum dolor sit amet, consectetur adipiscing elit. Morbi ut blandit risus. Donec mollis nec tellus et rutrum. Orci varius natoque penatibus et magnis dis parturient montes, nascetur ridiculus mus. Ut consequat quam a purus faucibus scelerisque. Mauris ac dui ante. Pellentesque congue porttitor tempus. Donec sodales dapibus urna sed dictum. Duis congue posuere libero, a aliquam est porta quis.
Donec ullamcorper magna enim, vitae fermentum turpis elementum quis. Interdum et malesuada fames ac ante ipsum primis in faucibus.
Curabitur vel sem mi. Proin in lobortis ipsum. Aliquam rutrum tempor ex ac rutrum. Maecenas nunc nulla, placerat at eleifend in, viverra etos sem. Nam sagittis lacus metus, dignissim blandit magna euismod eget. Suspendisse a nisl lacus. Phasellus eget augue tincidunt, sollicitudin lectus sed, convallis desto. Pellentesque vitae dui lacinia, venenatis erat sit amet, fringilla felis. Nullam maximus nisi nec mi facilisis.
SHIPPING
Lorem ipsum dolor sit amet, consectetur adipiscing elit. Morbi ut blandit risus. Donec mollis nec tellus et rutrum. Orci varius natoque penatibus et magnis dis parturient montes, nascetur ridiculus mus. Ut consequat quam a purus faucibus scelerisque. Mauris ac dui ante. Pellentesque congue porttitor tempus. Donec sodales dapibus urna sed dictum. Duis congue posuere libero, a aliquam est porta quis.
Donec ullamcorper magna enim, vitae fermentum turpis elementum quis. Interdum et malesuada fames ac ante ipsum primis in faucibus.
Curabitur vel sem mi. Proin in lobortis ipsum. Aliquam rutrum tempor ex ac rutrum. Maecenas nunc nulla, placerat at eleifend in, viverra etos sem. Nam sagittis lacus metus, dignissim blandit magna euismod eget. Suspendisse a nisl lacus. Phasellus eget augue tincidunt, sollicitudin lectus sed, convallis desto. Pellentesque vitae dui lacinia, venenatis erat sit amet, fringilla felis. Nullam maximus nisi nec mi facilisis.
